What factors determine the use effect of LED assembly line
LED assembly line
The LED assembly line has three major characteristics: 1. Highly automated operation; 2. Reduce production costs and improve enterprise production efficiency; 3. Ensure the stability of the production process. But sometimes we also encounter some problems in actual applications that affect the actual use of the LED assembly line. Then we know what factors generally affect the use of the LED assembly line? Guang Shengde is here to explain.
1. The friction coefficient of the conveying material of LED lamps
Simply increasing the roughness of the material conveyed by the LED lamp will increase the resistance of the material to the axial movement in the belt conveyor. Therefore, in order to reduce the resistance, the friction coefficient at the bottom of the belt conveyor barrel should be reduced to make the bottom as smooth as possible. Increase the friction coefficient of the side wall of the belt conveyor barrel to suppress the effect of centrifugal force.
2. Inclination control of the conveying equipment of the LED assembly line
LED assembly lines are generally divided into three types: horizontal, inclined and vertical. Horizontal type and vertical type are widely used in practical applications, so the related research on design and manufacturing and performance parameters is relatively mature. Sometimes in order to improve efficiency, it is necessary to set a certain inclination angle for the conveyor. The specific angle needs to be based on the actual situation
3. The LED assembly line is affected by the conveying material LED lamps
The smaller the friction coefficient of the LED lamp to the inner wall of the LED assembly line, the higher the height of the material being thrown or carried, the more difficult it is to slide down the inner wall of the conveyor, and the longer the path for the material to fall. Correspondingly, the conveying efficiency of the conveyor will be reduced. In order to obtain high-efficiency transportation, the inner wall of the cylinder should have a certain roughness, and the coefficient of friction should be appropriately larger.
The above three factors affect the use effect of the LED assembly line, but this is a factor of the equipment. In fact, the main factor is the operator on the LED assembly line. The proficiency of the operator and the mood of the LED assembly line operator are direct. The project factors that affect the use effect of the LED assembly line, we must first consider the LED assembly line person factor when considering the production effect, and take the LED assembly line equipment factor into consideration after excluding the human factor.
Comparison of structural composition and advantages&disadvantages of automated assembly production lines
The automatic assembly production line is a system that asse...
Interpretation of the structural characteristics and accuracy for pick and place machine
Whether it is a fully automatic or a manual , whether it is ...
Grandseed LED Intelligent Equipment
Main business: Electronic integrated production line solutio...
Key points of wave soldering equipment operation
Wave soldering equipment is currently widely used automatic ...
Phone：138 2871 9992
Address：Grandseed Science and Technology Park, No.177, Fenghuang Avenue, Fenghuang Community, Fuyong Street, Bao'an District, Shenzhen