backtrackYour location:Home → Producs → Aging line
Multi-layer automatic aging line for bulb lampCategory:Aging line
一、Engineering structure drawing of multi-layer automatic aging line for Guangshengde bulb lamp
二、Overview of the characteristics of the multi-layer automatic aging line for Guangshengde bulb lamps
1. The main components of the multi-layer aging line of Guangshengde bulb lamp are: aging line, reciprocating hoist, up and down transfer platform, return board machine and electronic control.
2. The multi-layer aging line of Guangshengde bulb lamp is the second to fourth layer aging at the same time; the layer is the half line of the empty board (not including the guide rail)
3. The loading and unloading area adopts the function of isolation transformer to improve the operating safety factor and effective protection.
4. The frequency conversion system adopts frequency conversion speed regulation system, which is simple and convenient to operate.
5. Power-on aging can be carried out when the online body is not running;
6. Using touch screen and programmable controller PLC as the control system, and equipped with sound and light alarm function
7. Each floor adopts a 30KVA0-300V Tianzheng brand voltage regulator, and adjusts the voltage manually according to different products.
8. The structure of the multi-layer aging line of Guangshengde bulb lamp is straight and firm, and there will be no crawling and jitter. The electrical action is flexible, accurate and feasible.
Relying on good performance, all mechanism design and installation should meet the accuracy requirements of relevant regulations.
9. The air inlet of each line body of the Guangshengde bulb multi-layer aging line is equipped with an oil-water separator cover, the air pipe is Ø3/4", and the air path is equipped with a
Water valve, air valve pressure 05~0.8mpa, the whole air path has no abnormal phenomena such as water leakage, air leakage, oil leakage, etc.
10. The main pole line of the multi-layer aging line of the Guangshengde bulb lamp is a three-phase five-wire system, with reliable grounding, and the electrical wiring should be neat and clear, and the control switch
, Buttons, indicator lights, etc. have obvious signs. The power supply of the conductive wheel is provided by an isolation transformer and a voltage regulator. The lower side of the line body is equipped with Ø4mm² anti-static copper wire. The design, manufacture and installation of all electrical distribution boxes and main control cabinets should comply with electrical technical safety standards.
11. Each line body is installed firmly and straight, and the steel is sprayed with powder after derusting and degreasing. The main color is computer white, which makes the whole line beautiful
Looks and generous; the paint surface is required to be flat, smooth and firm.
To learn more about the characteristics of the multi-layer automatic aging line of Guangshengde bulb lamp, please contact Guangshengde.