backtrackYour location:Home → Producs → Aging line
LED panel light aging lineCategory:Aging line
Features of Guangshengde 18m LED panel light aging line:
This equipment is dedicated to the automatic aging of the whole lamp. Observe whether the lamp can withstand the impact of these voltages, burst capacitors and short circuits, etc., to improve the quality of these products through the experience of the high, medium and low voltage, impulse voltage, simulated mains fluctuation voltage and other voltages of the whole lamp! The whole machine adopts brand touch screen and PLC control, high-power voltage regulator, strong power output, and tests the current, voltage and power factor of the whole lamp at the same time, displaying defective products, and special testing equipment. The current LED lights can be aged on this equipment, providing a full range of quality assurance for your products!
Guangshengde 18m LED panel light aging line fuselage line structure:
1. The frame adopts 50×50×2mm rectangular steel pipe, and the height of the working surface: 1200±20mm
2. The head and tail guards of the fuselage are made by bending 1.5mm cold steel plate, and the feet are equipped with galvanized adjustable feet; the fuselage is 2 meters away.
3. Equipped with conductive systems (made of high-quality stainless steel) on each side of the body frame along the side of the trolley, and arranged along the line on both sides.
4. Use the C2082HP hollow shaft pin chain produced by Hangzhou Chain Factory, the ring length is about 30 meters
Guangshengde 18m LED panel light aging line stage trolley specifications:
1. Each trolley is equipped with 12 sockets for aging power supply (of which red is positive and black is negative)
2. LED street lights and panel lights can be aged on each trolley at the same time.
3. Two-way conduction system is installed on the side of the trolley, and a special electric copper brush is used for conduction. There is a high-breaking miniature circuit breaker as a protection circuit.
4. There are 44 small trolleys in the whole line (calculated based on actual assembly). The specific production can refer to the size of the customer's product. The internal connection line of the trolley must meet the actual load and use copper core wires)
Guangshengde 18m LED panel light aging line detection circuit design
A total of 2 sets of detection circuits are used in the whole line, and zone 1 is arbitrarily set as the cycle life aging control zone. It adopts digital display time relay control, adjustable turn-off time, and voltage change output.